Geometry class used to represent coast profile objects. More...

#include <profile.h>

Public Member Functions
	CGeomProfile (int const, int const, int const, bool const)
	In external CRS, the coords of cells 'under' this profile (has the same length as m_VCellInProfile)

	~CGeomProfile (void) override
	Destructor.

int	nGetCoastID (void) const
	Returns this profile's coast ID.

int	nGetProfileID (void) const
	Returns the profile's this-coast ID.

int	nGetCoastPoint (void) const
	Returns the coast point at which the profile starts.

CGeom2DIPoint *	pPtiGetStartPoint (void)
	Returns a pointer to the location of the cell (grid CRS) on which the profile starts.

CGeom2DIPoint *	pPtiGetEndPoint (void)
	Returns a pointer to the location of the cell (grid CRS) on which the profile ends.

void	SetStartOfCoast (bool const)
	Sets a switch to indicate whether this is a start-of-coast profile.

bool	bStartOfCoast (void) const
	Returns the switch to indicate whether this is a start-of-coast profile.

void	SetEndOfCoast (bool const)
	Sets a switch to indicate whether this is an end-of-coast profile.

bool	bEndOfCoast (void) const
	Returns the switch to indicate whether this is an end-of-coast profile.

bool	bIsGridEdge (void) const
	Returns true if this is a start-of-coast or an end-of-coast profile.

void	SetCShoreProblem (bool const)
	Sets a switch to indicate whether this profile has a CShore problem.

bool	bCShoreProblem (void) const
	Returns the switch which indicates whether this profile has a CShore problem.

void	SetHitLand (bool const)
	Sets a switch which indicates whether this profile has hit land.

bool	bHitLand (void) const
	Returns the switch which indicates whether this profile has hit land.

void	SetHitIntervention (bool const)
	Sets a switch which indicates whether this profile has hit an intervention.

bool	bHitIntervention (void) const
	Returns the switch which indicates whether this profile has hit an intervention.

void	SetHitCoast (bool const)
	Sets a switch which indicates whether this profile has hit a coast.

bool	bHitCoast (void) const
	Returns the switch which indicates whether this profile has hit a coast.

void	SetTooShort (bool const)
	Sets a switch which indicates whether this profile is too short to be useful.

bool	bTooShort (void) const
	Returns the switch which indicates whether this profile is too short to be useful.

void	SetTruncatedSameCoast (bool const)
	Sets a switch which indicates whether this profile is truncated, due to hitting another profile from the same coast.

bool	bTruncatedSameCoast (void) const
	Returns the switch which indicates whether this profile has been truncated, due to hitting another profile from the same coast.

void	SetTruncatedDifferentCoast (bool const)
	Sets a switch which indicates whether this profile is truncated, due to hitting another profile from a different coast.

bool	bTruncatedDifferentCoast (void) const
	Returns the switch which indicates whether this profile has been truncated, due to hitting another profile from a different coast.

void	SetHitAnotherProfile (bool const)
	Sets a switch which indicates whether this profile hits another profile badly.

bool	bHitAnotherProfile (void) const
	Returns the switch which indicates whether this profile hits another profile badly.

bool	bProfileOK (void) const
	Returns true if this is a problem-free profile, and is not a start-of-coast and is not an end-of-coast profile.

bool	bProfileOKIncTruncated (void) const
	Returns true if this is a problem-free profile, and is not a start-of-coast and is not an end-of-coast profile. But it can be a truncated profile due to hitting another profile from this coast or from a different coast.

bool	bOKIncStartAndEndOfCoast (void) const
	Returns true if this is a problem-free profile (however it could be a start-of-coast or an end-of-coast profile, or could be truncated due to hitting a different coast)

void	SetPointsInProfile (vector< CGeom2DPoint > const *)
	Sets points (external CRS) in the profile. Note that only two points, the start and end point, are initially stored each profile.

void	SetPointInProfile (int const, double const, double const)
	Sets a single point (external CRS) in the profile.

void	AppendPointInProfile (double const, double const)
	Appends a point (external CRS) to the profile.

void	AppendPointInProfile (CGeom2DPoint const *)
	Appends a point (external CRS) to the profile (overloaded version)

void	TruncateProfile (int const)
	Truncates the profile's CGeomLine (external CRS points)

bool	bInsertIntersection (double const, double const, int const)
	Inserts an intersection (at a point specified in external CRS, with a line segment) into the profile.

int	nGetProfileSize (void) const
	Returns the number of external CRS points in the profile (only two, initally; and always just two for grid-edge profiles)

CGeom2DPoint *	pPtGetPointInProfile (int const)
	Returns a single point (external CRS) from the profile.

vector< CGeom2DPoint >	PtVGetThisPointAndAllAfter (int const)
	Returns a given external CRS point from the profile, and all points after this.

bool	bIsPointInProfile (double const, double const)
	Removes a line segment from the profile.

bool	bIsPointInProfile (double const, double const, int &)
	Queries the profile: is the given point (external CRS) a profile point? If so, then it also returns the number of the point in the profile.

void	SetUpCoastAdjacentProfile (CGeomProfile *)
	Sets the up-coast adjacent profile.

void	SetDownCoastAdjacentProfile (CGeomProfile *)
	Sets the down-coast adjacent profile.

CGeomProfile *	pGetDownCoastAdjacentProfile (void) const
	Returns the down-coast adjacent profile, returns NULL if there is no down-coast adjacent profile.

void	AppendCellInProfile (CGeom2DIPoint const *)
	Appends a cell (grid CRS) to the profile.

void	AppendCellInProfile (int const, int const)
	Appends a cell (grid CRS) to the profile (overloaded version)

void	SetCellsInProfile (vector< CGeom2DIPoint > const *)
	Sets the profile's vector of cells (grid CRS)

vector< CGeom2DIPoint > *	pPtiVGetCellsInProfile (void)
	Returns all cells (grid CRS) in the profile.

CGeom2DIPoint *	pPtiGetCellInProfile (int const)
	Returns a single cell (grid CRS) in the profile.

int	nGetNumCellsInProfile (void) const
	Returns the number of cells in the profile.

CGeom2DIPoint *	pPtiGetLastCellInProfile (void)
	Returns the last cell (grid CRS) in the profile.

CGeom2DIPoint *	pPtiGetFirstCellInProfile (void)
	Returns the first cell (grid CRS) in the profile.

int	nGetCellGivenDepth (CGeomRasterGrid const *, double const)
	Returns the index of the cell on this profile which has a sea depth which is just less than a given depth. If every cell on the profile has a sea depth which is less than the given depth it returns INT_NODATA.

void	SetProfileDeepWaterWaveHeight (double const)
	Sets the deep-water wave height for this profile.

double	dGetProfileDeepWaterWaveHeight (void) const
	Returns the deep-water wave height for this profile.

void	SetProfileDeepWaterWaveAngle (double const)
	Sets the deep-water wave orientation for this profile.

double	dGetProfileDeepWaterWaveAngle (void) const
	Returns the deep-water wave orientation for this profile.

void	SetProfileDeepWaterWavePeriod (double const)
	Sets the deep-water wave period for this profile.

double	dGetProfileDeepWaterWavePeriod (void) const
	Returns the deep-water wave period for this profile.

bool	bIsIntervention (void) const
	Returns true if this is an intervention profile.

Public Member Functions inherited from CGeomMultiLine
	CGeomMultiLine (void)
	Constructor, no parameters.

	~CGeomMultiLine (void) override
	Destructor.

vector< CGeom2DPoint > &	pGetPoints (void)
	Returns a pointer to the points of the CGeomLine.

void	AppendLineSegment (void)
	Appends a new empty line segment.

void	AppendLineSegment (vector< pair< int, int > > *)
	Appends a line segment which is supplied as a parameter.

int	nGetNumLineSegments (void) const
	Appends a line segment which then inherits from the preceding line segments.

void	TruncateLineSegments (int const)
	Cuts short the number of line segments.

void	InsertLineSegment (int const)
	Inserts a line segment, inheriting from preceding line segments.

vector< vector< pair< int, int > > >	prVVGetAllLineSegAfter (int const)
	Returns a vector of the line segments which succeed the specified line segment number.

void	AppendCoincidentProfileToLineSegments (pair< int, int > const)
	Appends a coincident profile pair to the CGeomMultiLine object's final line segment.

void	AddCoincidentProfileToExistingLineSegment (int const, int const, int const)
	Adds a coincident profile to a pre-existing line segment of the CGeomMultiLine object.

vector< pair< int, int > > *	pprVGetPairedCoincidentProfilesForLineSegment (int const)
	Returns a vector of pairs (a line segment)

int	nGetCoincidentProfileForLineSegment (int const, int const) const
	Returns the numbers of coincident profiles.

int	nGetNumCoincidentProfilesInLineSegment (int const)
	Returns the count of coincident profiles in a specified line segment, or -1 if the line segment does not exist.

bool	bFindProfileInCoincidentProfilesOfLastLineSegment (int const)
	Returns true if the given profile number is amongst the coincident profiles of the CGeomMultiLine object's final line segment.

bool	bFindProfileInCoincidentProfiles (int const)
	Returns true if the given profile number is one of the coincident profiles of the a specified line segment.

void	GetMostCoastwardSharedLineSegment (int const, int &, int &)
	Finds the number of the most coastward line segment for which the two profiles are coincident, or -1 if they are not coincident. If they are coincident, also finds the line segment of the other profile.

int	nGetProf (int const, int const) const
	Returns the profile number, given a line segment and the index of the co-incident profile for that line segment.

int	nGetProfsLineSeg (int const, int const) const
	Returns the profile's own line segment, given a line segment and the index of the co-incident profile for that line segment.

void	SetProfsLineSeg (int const, int const, int const)
	Sets a profile's own line segment number, given a line segment and the index of the co-incident profile for that line segment.

Public Member Functions inherited from CGeomLine
	CGeomLine (void)
	Constructor.

	CGeomLine (CGeom2DPoint const , CGeom2DPoint const )
	Overloaded constructor with two points as parameters.

	CGeomLine (int const)
	Overloaded constructor with one parameter, this creates a given number of uninitialised points.

	~CGeomLine (void) override
	Destructor.

double	dGetXAt (int const)
	Returns the X value at a given place in the line.

double	dGetYAt (int const)
	Returns the Y value at a given place in the line.

CGeom2DPoint *	pPtGetAt (int const)
	Returns the point at a given place in the line.

Public Member Functions inherited from CA2DShape
void	Reverse (void)
	Reverses the sequence of points in the vector which represents this 2D polygon.

int	nGetSize (void) const

void	Resize (int const)
	Resizes the vector which represents this 2D shape.

void	Append (CGeom2DPoint const *)
	Appends a point to this 2D shape.

void	Append (double const, double const)
	Appends a point to this 2D shape.

void	AppendIfNotPrevious (double const, double const)
	Appends a point to this 2D shape only if the point is not the same as the previous point in the vector.

CGeom2DPoint *	pPtBack (void)
	Returns the last element of this 2D shape.

CGeom2DPoint &	operator[] (int const)
	Operator to return one point of this 2D shape.

vector< CGeom2DPoint > *	pPtVGetPoints (void)
	Returns the address of the vector which represents this 2D shape.

Private Attributes
bool	m_bStartOfCoast
	Is this a start-of-coast profile?

bool	m_bEndOfCoast
	Is this an end-of-coast profile?

bool	m_bCShoreProblem
	Has this profile encountered a CShore problem?

bool	m_bHitLand
	Has this profile hit land?

bool	m_bHitIntervention
	Has this profile hit an intervention?

bool	m_bHitCoast
	Has this profile hit a coastline?

bool	m_bTooShort
	Is this profile too short?

bool	m_bTruncatedSameCoast
	Has this profile been truncated by hitting another profile from the same coast?

bool	m_bTruncatedDifferentCoast
	Has this profile been truncated by hitting another profile from a different coast?

bool	m_bHitAnotherProfile
	Has this profile hit another profile?

bool	m_bIntervention
	Is this an intervention profile?

int	m_nCoast
	The coast from which this profile projects.

int	m_nCoastPoint
	The coastline point at which this profile hits the coast (not necessarily coincident wih the profile start cell)

int	m_nProfileID
	The this-coast ID of the profile (note that a profile in a different coast may have the same ID as this profile)

double	m_dDeepWaterWaveHeight
	The wave height at the end of the profile.

double	m_dDeepWaterWaveAngle
	The wave orientation at the end of the profile.

double	m_dDeepWaterWavePeriod
	The wave period at the end of the profile.

CGeomProfile *	m_pUpCoastAdjacentProfile
	Pointer to the adjacent up-coast profile (may be an invalid profile)

CGeomProfile *	m_pDownCoastAdjacentProfile
	Pointer to the adjacent down-coast profile (may be an invalid profile)

vector< CGeom2DIPoint >	m_VCellInProfile
	In the grid CRS, the integer coordinates of the cells 'under' this profile, point zero is the same as 'cell marked as coastline' in coast object.

Additional Inherited Members
Protected Member Functions inherited from CGeomLine
void	Display (void) override
	Instantiates the pure virtual function in the abstract parent class, so that CGeomLine is not an abstract class.

Protected Member Functions inherited from CA2DShape
	CA2DShape (void)
	Constructor.

virtual	~CA2DShape (void)
	Destructor.

Protected Attributes inherited from CA2DShape
vector< CGeom2DPoint >	m_VPoints
	The points which comprise the float-coordinate 2D shape.

Detailed Description

Geometry class used to represent coast profile objects.

TODO 001 This is a more detailed description of the CGeomProfile class.

Author: David Favis-Mortlock; Andres Payo

Date: 2025

Copyright: GNU General Public License

Definition at line 32 of file profile.h.

Constructor & Destructor Documentation

◆ CGeomProfile()

CGeomProfile::CGeomProfile	(	int const	nCoast,
		int const	nCoastPoint,
		int const	nProfileID,
		bool const	bIntervention )

explicit

In external CRS, the coords of cells 'under' this profile (has the same length as m_VCellInProfile)

Constructor with initialisation list.

Definition at line 39 of file profile.cpp.

Referenced by pGetDownCoastAdjacentProfile(), SetDownCoastAdjacentProfile(), and SetUpCoastAdjacentProfile().

◆ ~CGeomProfile()

CGeomProfile::~CGeomProfile ( void )

override

Destructor.

Definition at line 63 of file profile.cpp.

Member Function Documentation

◆ AppendCellInProfile() [1/2]

void CGeomProfile::AppendCellInProfile ( CGeom2DIPoint const * pPti )

Appends a cell (grid CRS) to the profile.

Definition at line 494 of file profile.cpp.

Referenced by CSimulation::nLocateAndCreateGridEdgeProfile().

◆ AppendCellInProfile() [2/2]

void CGeomProfile::AppendCellInProfile	(	int const	nX,
		int const	nY )

Appends a cell (grid CRS) to the profile (overloaded version)

Definition at line 500 of file profile.cpp.

◆ AppendPointInProfile() [1/2]

void CGeomProfile::AppendPointInProfile ( CGeom2DPoint const * pPt )

Appends a point (external CRS) to the profile (overloaded version)

Definition at line 313 of file profile.cpp.

◆ AppendPointInProfile() [2/2]

void CGeomProfile::AppendPointInProfile	(	double const	dNewX,
		double const	dNewY )

Appends a point (external CRS) to the profile.

Definition at line 307 of file profile.cpp.

Referenced by CSimulation::MergeProfilesAtFinalLineSegments(), CSimulation::nLocateAndCreateGridEdgeProfile(), CSimulation::nTruncateProfileMultiLineDifferentCoasts(), and CSimulation::TruncateProfileAndAppendNew().

◆ bCShoreProblem()

bool CGeomProfile::bCShoreProblem ( void ) const

Returns the switch which indicates whether this profile has a CShore problem.

Definition at line 137 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ bEndOfCoast()

bool CGeomProfile::bEndOfCoast ( void ) const

Returns the switch to indicate whether this is an end-of-coast profile.

Definition at line 116 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile(), CSimulation::InterpolateWavePropertiesBetweenProfiles(), CSimulation::nCreateAllPolygons(), CSimulation::nTruncateProfileHitDifferentCoast(), and CSimulation::nTruncateProfilesDifferentCoasts().

◆ bHitAnotherProfile()

bool CGeomProfile::bHitAnotherProfile ( void ) const

Returns the switch which indicates whether this profile hits another profile badly.

Definition at line 221 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ bHitCoast()

bool CGeomProfile::bHitCoast ( void ) const

Returns the switch which indicates whether this profile has hit a coast.

Definition at line 173 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ bHitIntervention()

bool CGeomProfile::bHitIntervention ( void ) const

Returns the switch which indicates whether this profile has hit an intervention.

Definition at line 161 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ bHitLand()

bool CGeomProfile::bHitLand ( void ) const

Returns the switch which indicates whether this profile has hit land.

Definition at line 149 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ bInsertIntersection()

bool CGeomProfile::bInsertIntersection	(	double const	dX,
		double const	dY,
		int const	nSeg )

Inserts an intersection (at a point specified in external CRS, with a line segment) into the profile.

Definition at line 319 of file profile.cpp.

Referenced by CSimulation::nInsertPointIntoProfilesIfNeededThenUpdate().

◆ bIsGridEdge()

bool CGeomProfile::bIsGridEdge ( void ) const

Returns true if this is a start-of-coast or an end-of-coast profile.

Definition at line 122 of file profile.cpp.

Referenced by CSimulation::CreateRasterizedProfile(), CSimulation::MarkProfilesOnGrid(), CSimulation::nDoAllPropagateWaves(), CSimulation::nDoMultipleCoastlines(), and CSimulation::nTruncateProfilesDifferentCoasts().

◆ bIsIntervention()

bool CGeomProfile::bIsIntervention ( void ) const

Returns true if this is an intervention profile.

Definition at line 607 of file profile.cpp.

Referenced by CSimulation::CheckForIntersectingProfiles(), and CSimulation::nCreateProfile().

◆ bIsPointInProfile() [1/2]

bool CGeomProfile::bIsPointInProfile	(	double const	dX,
		double const	dY )

Removes a line segment from the profile.

Queries the profile: is the given point (external CRS) a profile point?

Definition at line 383 of file profile.cpp.

Referenced by CSimulation::CheckForIntersectingProfiles().

◆ bIsPointInProfile() [2/2]

bool CGeomProfile::bIsPointInProfile	(	double const	dX,
		double const	dY,
		int &	nPoint )

Queries the profile: is the given point (external CRS) a profile point? If so, then it also returns the number of the point in the profile.

Definition at line 395 of file profile.cpp.

◆ bOKIncStartAndEndOfCoast()

bool CGeomProfile::bOKIncStartAndEndOfCoast ( void ) const

Returns true if this is a problem-free profile (however it could be a start-of-coast or an end-of-coast profile, or could be truncated due to hitting a different coast)

Definition at line 262 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile(), CSimulation::InterpolateWavePropertiesBetweenProfiles(), CSimulation::ModifyBreakingWavePropertiesWithinShadowZoneToCoastline(), CSimulation::nCalcPotentialPlatformErosionBetweenProfiles(), CSimulation::nCalcPotentialPlatformErosionOnProfile(), CSimulation::nCalcWavePropertiesOnProfile(), and CSimulation::nCreateAllPolygons().

◆ bProfileOK()

bool CGeomProfile::bProfileOK ( void ) const

Returns true if this is a problem-free profile, and is not a start-of-coast and is not an end-of-coast profile.

Definition at line 227 of file profile.cpp.

Referenced by CSimulation::nCheckAndMarkAllProfiles(), and CSimulation::nDoPolygonSharedBoundaries().

◆ bProfileOKIncTruncated()

bool CGeomProfile::bProfileOKIncTruncated ( void ) const

Returns true if this is a problem-free profile, and is not a start-of-coast and is not an end-of-coast profile. But it can be a truncated profile due to hitting another profile from this coast or from a different coast.

Definition at line 245 of file profile.cpp.

Referenced by CSimulation::CheckForIntersectingProfiles().

◆ bStartOfCoast()

bool CGeomProfile::bStartOfCoast ( void ) const

Returns the switch to indicate whether this is a start-of-coast profile.

Definition at line 104 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile(), CSimulation::nCreateAllPolygons(), CSimulation::nTruncateProfileHitDifferentCoast(), and CSimulation::nTruncateProfilesDifferentCoasts().

◆ bTooShort()

bool CGeomProfile::bTooShort ( void ) const

Returns the switch which indicates whether this profile is too short to be useful.

Definition at line 185 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ bTruncatedDifferentCoast()

bool CGeomProfile::bTruncatedDifferentCoast ( void ) const

Returns the switch which indicates whether this profile has been truncated, due to hitting another profile from a different coast.

Definition at line 209 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ bTruncatedSameCoast()

bool CGeomProfile::bTruncatedSameCoast ( void ) const

Returns the switch which indicates whether this profile has been truncated, due to hitting another profile from the same coast.

Definition at line 197 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ dGetProfileDeepWaterWaveAngle()

double CGeomProfile::dGetProfileDeepWaterWaveAngle ( void ) const

Returns the deep-water wave orientation for this profile.

Definition at line 589 of file profile.cpp.

Referenced by CSimulation::nCalcWavePropertiesOnProfile(), and CSimulation::nSetAllCoastpointDeepWaterWaveValues().

◆ dGetProfileDeepWaterWaveHeight()

double CGeomProfile::dGetProfileDeepWaterWaveHeight ( void ) const

Returns the deep-water wave height for this profile.

Definition at line 577 of file profile.cpp.

Referenced by CSimulation::nCalcWavePropertiesOnProfile(), and CSimulation::nSetAllCoastpointDeepWaterWaveValues().

◆ dGetProfileDeepWaterWavePeriod()

double CGeomProfile::dGetProfileDeepWaterWavePeriod ( void ) const

Returns the deep-water wave period for this profile.

Definition at line 601 of file profile.cpp.

Referenced by CSimulation::nCalcWavePropertiesOnProfile(), and CSimulation::nSetAllCoastpointDeepWaterWaveValues().

◆ nGetCellGivenDepth()

int CGeomProfile::nGetCellGivenDepth	(	CGeomRasterGrid const *	pGrid,
		double const	dDepthIn )

Returns the index of the cell on this profile which has a sea depth which is just less than a given depth. If every cell on the profile has a sea depth which is less than the given depth it returns INT_NODATA.

Definition at line 545 of file profile.cpp.

Referenced by CSimulation::nDoUnconsDepositionOnPolygon(), and CSimulation::nDoUnconsErosionOnPolygon().

◆ nGetCoastID()

int CGeomProfile::nGetCoastID ( void ) const

Returns this profile's coast ID.

Definition at line 68 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile().

◆ nGetCoastPoint()

int CGeomProfile::nGetCoastPoint ( void ) const

Returns the coast point at which the profile starts.

Definition at line 80 of file profile.cpp.

Referenced by CSimulation::CreateRasterizedProfile(), CSimulation::InterpolateWavePropertiesBetweenProfiles(), CSimulation::ModifyBreakingWavePropertiesWithinShadowZoneToCoastline(), CSimulation::nCalcPotentialPlatformErosionBetweenProfiles(), CSimulation::nCalcPotentialPlatformErosionOnProfile(), CSimulation::nCalcWavePropertiesOnProfile(), CSimulation::nCreateAllPolygons(), CSimulation::nDoUnconsDepositionOnPolygon(), CSimulation::nDoUnconsErosionOnPolygon(), and CSimulation::nSetAllCoastpointDeepWaterWaveValues().

◆ nGetNumCellsInProfile()

int CGeomProfile::nGetNumCellsInProfile ( void ) const

Returns the number of cells in the profile.

Definition at line 539 of file profile.cpp.

Referenced by CSimulation::ModifyBreakingWavePropertiesWithinShadowZoneToCoastline(), CSimulation::nCalcPotentialPlatformErosionBetweenProfiles(), CSimulation::nCalcPotentialPlatformErosionOnProfile(), CSimulation::nCalcWavePropertiesOnProfile(), CSimulation::nCreateAllPolygons(), CSimulation::nDoMultipleCoastlines(), CSimulation::nDoUnconsDepositionOnPolygon(), CSimulation::nDoUnconsErosionOnPolygon(), and CSimulation::nTruncateProfilesDifferentCoasts().

◆ nGetProfileID()

int CGeomProfile::nGetProfileID ( void ) const

Returns the profile's this-coast ID.

Definition at line 74 of file profile.cpp.

Referenced by CSimulation::bWriteProfileData(), CSimulation::CheckForIntersectingProfiles(), CSimulation::CreateRasterizedProfile(), CSimulation::MarkProfilesOnGrid(), CSimulation::nCalcPotentialPlatformErosionOnProfile(), CSimulation::nCalcWavePropertiesOnProfile(), CSimulation::nCheckAndMarkAllProfiles(), CSimulation::nCreateAllPolygons(), CSimulation::nDoAllPropagateWaves(), CSimulation::nDoMultipleCoastlines(), CSimulation::nGetThisProfileElevationsForCShore(), CSimulation::nInsertPointIntoProfilesIfNeededThenUpdate(), CSimulation::nSaveParProfile(), and CSimulation::nSaveProfile().

◆ nGetProfileSize()

int CGeomProfile::nGetProfileSize ( void ) const

Returns the number of external CRS points in the profile (only two, initally; and always just two for grid-edge profiles)

Definition at line 358 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile(), CSimulation::MarkProfilesOnGrid(), CSimulation::MergeProfilesAtFinalLineSegments(), CSimulation::nCalcPotentialPlatformErosionOnProfile(), CSimulation::nCheckAndMarkAllProfiles(), and CSimulation::nCreateAllPolygons().

◆ pGetDownCoastAdjacentProfile()

CGeomProfile * CGeomProfile::pGetDownCoastAdjacentProfile ( void ) const

Returns the down-coast adjacent profile, returns NULL if there is no down-coast adjacent profile.

Definition at line 488 of file profile.cpp.

Referenced by CSimulation::InterpolateWavePropertiesBetweenProfiles(), CSimulation::nCreateAllPolygons(), and CSimulation::nSetAllCoastpointDeepWaterWaveValues().

◆ pPtGetPointInProfile()

CGeom2DPoint * CGeomProfile::pPtGetPointInProfile ( int const n )

Returns a single point (external CRS) from the profile.

Definition at line 364 of file profile.cpp.

Referenced by CSimulation::bWriteVectorGISFile(), CSimulation::CreateRasterizedProfile(), CSimulation::nCalcPotentialPlatformErosionOnProfile(), CSimulation::nCheckAndMarkAllProfiles(), CSimulation::nCreateAllPolygons(), and CSimulation::nDoPolygonSharedBoundaries().

◆ pPtiGetCellInProfile()

CGeom2DIPoint * CGeomProfile::pPtiGetCellInProfile ( int const n )

Returns a single cell (grid CRS) in the profile.

Definition at line 518 of file profile.cpp.

Referenced by CSimulation::ModifyBreakingWavePropertiesWithinShadowZoneToCoastline(), CSimulation::nCalcWavePropertiesOnProfile(), CSimulation::nCreateAllPolygons(), CSimulation::nDoMultipleCoastlines(), CSimulation::nDoUnconsDepositionOnPolygon(), and CSimulation::nDoUnconsErosionOnPolygon().

◆ pPtiGetEndPoint()

CGeom2DIPoint * CGeomProfile::pPtiGetEndPoint ( void )

Returns a pointer to the location of the cell (grid CRS) on which the profile ends.

Definition at line 92 of file profile.cpp.

Referenced by CSimulation::nCreateAllPolygons().

◆ pPtiGetFirstCellInProfile()

CGeom2DIPoint * CGeomProfile::pPtiGetFirstCellInProfile ( void )

Returns the first cell (grid CRS) in the profile.

Definition at line 532 of file profile.cpp.

Referenced by CSimulation::nTruncateProfileHitDifferentCoast(), and CSimulation::nTruncateProfilesDifferentCoasts().

◆ pPtiGetLastCellInProfile()

CGeom2DIPoint * CGeomProfile::pPtiGetLastCellInProfile ( void )

Returns the last cell (grid CRS) in the profile.

Definition at line 525 of file profile.cpp.

◆ pPtiGetStartPoint()

CGeom2DIPoint * CGeomProfile::pPtiGetStartPoint ( void )

Returns a pointer to the location of the cell (grid CRS) on which the profile starts.

Definition at line 86 of file profile.cpp.

Referenced by CSimulation::nCreateAllPolygons().

◆ pPtiVGetCellsInProfile()

vector< CGeom2DIPoint > * CGeomProfile::pPtiVGetCellsInProfile ( void )

Returns all cells (grid CRS) in the profile.

Definition at line 512 of file profile.cpp.

Referenced by CSimulation::nCalcPotentialPlatformErosionBetweenProfiles(), CSimulation::nCalcPotentialPlatformErosionOnProfile(), CSimulation::nGetThisProfileElevationsForCShore(), CSimulation::nTruncateProfileHitDifferentCoast(), and CSimulation::nTruncateProfilesDifferentCoasts().

◆ PtVGetThisPointAndAllAfter()

vector< CGeom2DPoint > CGeomProfile::PtVGetThisPointAndAllAfter ( int const nStart )

Returns a given external CRS point from the profile, and all points after this.

Definition at line 370 of file profile.cpp.

Referenced by CSimulation::TruncateOneProfileRetainOtherProfile().

◆ SetCellsInProfile()

void CGeomProfile::SetCellsInProfile ( vector< CGeom2DIPoint > const * VNewPoints )

Sets the profile's vector of cells (grid CRS)

Definition at line 506 of file profile.cpp.

Referenced by CSimulation::nTruncateProfileHitDifferentCoast(), and CSimulation::nTruncateProfilesDifferentCoasts().

◆ SetCShoreProblem()

void CGeomProfile::SetCShoreProblem ( bool const bFlag )

Sets a switch to indicate whether this profile has a CShore problem.

Definition at line 131 of file profile.cpp.

Referenced by CSimulation::nDoAllPropagateWaves().

◆ SetDownCoastAdjacentProfile()

void CGeomProfile::SetDownCoastAdjacentProfile ( CGeomProfile * pProfile )

Sets the down-coast adjacent profile.

Definition at line 482 of file profile.cpp.

Referenced by CSimulation::nCreateAllProfiles().

◆ SetEndOfCoast()

void CGeomProfile::SetEndOfCoast ( bool const bFlag )

Sets a switch to indicate whether this is an end-of-coast profile.

Definition at line 110 of file profile.cpp.

Referenced by CSimulation::nLocateAndCreateGridEdgeProfile().

◆ SetHitAnotherProfile()

void CGeomProfile::SetHitAnotherProfile ( bool const bFlag )

Sets a switch which indicates whether this profile hits another profile badly.

Definition at line 215 of file profile.cpp.

Referenced by CSimulation::CreateRasterizedProfile().

◆ SetHitCoast()

void CGeomProfile::SetHitCoast ( bool const bFlag )

Sets a switch which indicates whether this profile has hit a coast.

Definition at line 167 of file profile.cpp.

Referenced by CSimulation::CreateRasterizedProfile().

◆ SetHitIntervention()

void CGeomProfile::SetHitIntervention ( bool const bFlag )

Sets a switch which indicates whether this profile has hit an intervention.

Definition at line 155 of file profile.cpp.

Referenced by CSimulation::CreateRasterizedProfile().

◆ SetHitLand()

void CGeomProfile::SetHitLand ( bool const bFlag )

Sets a switch which indicates whether this profile has hit land.

Definition at line 143 of file profile.cpp.

Referenced by CSimulation::CreateRasterizedProfile().

◆ SetPointInProfile()

void CGeomProfile::SetPointInProfile	(	int const	nPoint,
		double const	dNewX,
		double const	dNewY )

Sets a single point (external CRS) in the profile.

Definition at line 300 of file profile.cpp.

Referenced by CSimulation::MergeProfilesAtFinalLineSegments().

◆ SetPointsInProfile()

void CGeomProfile::SetPointsInProfile ( vector< CGeom2DPoint > const * VNewPoints )

Sets points (external CRS) in the profile. Note that only two points, the start and end point, are initially stored each profile.

Definition at line 294 of file profile.cpp.

Referenced by CSimulation::nCreateProfile().

◆ SetProfileDeepWaterWaveAngle()

void CGeomProfile::SetProfileDeepWaterWaveAngle ( double const dWaveAngle )

Sets the deep-water wave orientation for this profile.

Definition at line 583 of file profile.cpp.

Referenced by CSimulation::nLocateAndCreateGridEdgeProfile().

◆ SetProfileDeepWaterWaveHeight()

void CGeomProfile::SetProfileDeepWaterWaveHeight ( double const dWaveHeight )

Sets the deep-water wave height for this profile.

Definition at line 571 of file profile.cpp.

Referenced by CSimulation::nLocateAndCreateGridEdgeProfile().

◆ SetProfileDeepWaterWavePeriod()

void CGeomProfile::SetProfileDeepWaterWavePeriod ( double const dWavePeriod )

Sets the deep-water wave period for this profile.

Definition at line 595 of file profile.cpp.

Referenced by CSimulation::nLocateAndCreateGridEdgeProfile().

◆ SetStartOfCoast()

void CGeomProfile::SetStartOfCoast ( bool const bFlag )

Sets a switch to indicate whether this is a start-of-coast profile.

Definition at line 98 of file profile.cpp.

Referenced by CSimulation::nLocateAndCreateGridEdgeProfile().

◆ SetTooShort()

void CGeomProfile::SetTooShort ( bool const bFlag )

Sets a switch which indicates whether this profile is too short to be useful.

Definition at line 179 of file profile.cpp.

Referenced by CSimulation::CreateRasterizedProfile().

◆ SetTruncatedDifferentCoast()

void CGeomProfile::SetTruncatedDifferentCoast ( bool const bFlag )

Sets a switch which indicates whether this profile is truncated, due to hitting another profile from a different coast.

Definition at line 203 of file profile.cpp.

Referenced by CSimulation::nTruncateProfileHitDifferentCoast(), and CSimulation::nTruncateProfilesDifferentCoasts().

◆ SetTruncatedSameCoast()

void CGeomProfile::SetTruncatedSameCoast ( bool const bFlag )

Sets a switch which indicates whether this profile is truncated, due to hitting another profile from the same coast.

Definition at line 191 of file profile.cpp.

Referenced by CSimulation::CreateRasterizedProfile().

◆ SetUpCoastAdjacentProfile()

void CGeomProfile::SetUpCoastAdjacentProfile ( CGeomProfile * pProfile )

Sets the up-coast adjacent profile.

Definition at line 470 of file profile.cpp.

Referenced by CSimulation::nCreateAllProfiles().

◆ TruncateProfile()

void CGeomProfile::TruncateProfile ( int const nSize )

Truncates the profile's CGeomLine (external CRS points)

Definition at line 338 of file profile.cpp.

Referenced by CSimulation::nTruncateProfileMultiLineDifferentCoasts(), and CSimulation::TruncateProfileAndAppendNew().

Field Documentation

◆ m_bCShoreProblem

bool CGeomProfile::m_bCShoreProblem

private

Has this profile encountered a CShore problem?

Definition at line 42 of file profile.h.

Referenced by bCShoreProblem(), bOKIncStartAndEndOfCoast(), bProfileOK(), bProfileOKIncTruncated(), CGeomProfile(), and SetCShoreProblem().

◆ m_bEndOfCoast

bool CGeomProfile::m_bEndOfCoast

private

Is this an end-of-coast profile?

Definition at line 39 of file profile.h.

Referenced by bEndOfCoast(), bIsGridEdge(), bProfileOK(), bProfileOKIncTruncated(), CGeomProfile(), and SetEndOfCoast().

◆ m_bHitAnotherProfile

bool CGeomProfile::m_bHitAnotherProfile

private

Has this profile hit another profile?

Definition at line 63 of file profile.h.

Referenced by bHitAnotherProfile(), bOKIncStartAndEndOfCoast(), bProfileOK(), bProfileOKIncTruncated(), CGeomProfile(), and SetHitAnotherProfile().

◆ m_bHitCoast

bool CGeomProfile::m_bHitCoast

private

Has this profile hit a coastline?

Definition at line 51 of file profile.h.

Referenced by bHitCoast(), bOKIncStartAndEndOfCoast(), bProfileOK(), bProfileOKIncTruncated(), CGeomProfile(), and SetHitCoast().

◆ m_bHitIntervention

bool CGeomProfile::m_bHitIntervention

private

Has this profile hit an intervention?

Definition at line 48 of file profile.h.

Referenced by bHitIntervention(), bOKIncStartAndEndOfCoast(), bProfileOK(), bProfileOKIncTruncated(), CGeomProfile(), and SetHitIntervention().

◆ m_bHitLand

bool CGeomProfile::m_bHitLand

private

Has this profile hit land?

Definition at line 45 of file profile.h.

Referenced by bHitLand(), bOKIncStartAndEndOfCoast(), bProfileOK(), bProfileOKIncTruncated(), CGeomProfile(), and SetHitLand().

◆ m_bIntervention

bool CGeomProfile::m_bIntervention

private

Is this an intervention profile?

Definition at line 66 of file profile.h.

Referenced by bIsIntervention(), and CGeomProfile().

◆ m_bStartOfCoast

bool CGeomProfile::m_bStartOfCoast

private

Is this a start-of-coast profile?

Definition at line 36 of file profile.h.

Referenced by bIsGridEdge(), bProfileOK(), bProfileOKIncTruncated(), bStartOfCoast(), CGeomProfile(), and SetStartOfCoast().

◆ m_bTooShort

bool CGeomProfile::m_bTooShort

private

Is this profile too short?

Definition at line 54 of file profile.h.

Referenced by bOKIncStartAndEndOfCoast(), bProfileOK(), bProfileOKIncTruncated(), bTooShort(), CGeomProfile(), and SetTooShort().

◆ m_bTruncatedDifferentCoast

bool CGeomProfile::m_bTruncatedDifferentCoast

private

Has this profile been truncated by hitting another profile from a different coast?

Definition at line 60 of file profile.h.

Referenced by bTruncatedDifferentCoast(), CGeomProfile(), and SetTruncatedDifferentCoast().

◆ m_bTruncatedSameCoast

bool CGeomProfile::m_bTruncatedSameCoast

private

Has this profile been truncated by hitting another profile from the same coast?

Definition at line 57 of file profile.h.

Referenced by bOKIncStartAndEndOfCoast(), bProfileOK(), bTruncatedSameCoast(), CGeomProfile(), and SetTruncatedSameCoast().

◆ m_dDeepWaterWaveAngle

double CGeomProfile::m_dDeepWaterWaveAngle

private

The wave orientation at the end of the profile.

Definition at line 81 of file profile.h.

Referenced by CGeomProfile(), dGetProfileDeepWaterWaveAngle(), and SetProfileDeepWaterWaveAngle().

◆ m_dDeepWaterWaveHeight

double CGeomProfile::m_dDeepWaterWaveHeight

private

The wave height at the end of the profile.

Definition at line 78 of file profile.h.

Referenced by CGeomProfile(), dGetProfileDeepWaterWaveHeight(), and SetProfileDeepWaterWaveHeight().

◆ m_dDeepWaterWavePeriod

double CGeomProfile::m_dDeepWaterWavePeriod

private

The wave period at the end of the profile.

Definition at line 84 of file profile.h.

Referenced by CGeomProfile(), dGetProfileDeepWaterWavePeriod(), and SetProfileDeepWaterWavePeriod().

◆ m_nCoast

int CGeomProfile::m_nCoast

private

The coast from which this profile projects.

Definition at line 69 of file profile.h.

Referenced by CGeomProfile(), and nGetCoastID().

◆ m_nCoastPoint

int CGeomProfile::m_nCoastPoint

private

The coastline point at which this profile hits the coast (not necessarily coincident wih the profile start cell)

Definition at line 72 of file profile.h.

Referenced by CGeomProfile(), and nGetCoastPoint().

◆ m_nProfileID

int CGeomProfile::m_nProfileID

private

The this-coast ID of the profile (note that a profile in a different coast may have the same ID as this profile)

Definition at line 75 of file profile.h.

Referenced by CGeomProfile(), and nGetProfileID().

◆ m_pDownCoastAdjacentProfile

CGeomProfile* CGeomProfile::m_pDownCoastAdjacentProfile

private

Pointer to the adjacent down-coast profile (may be an invalid profile)

Definition at line 90 of file profile.h.

Referenced by CGeomProfile(), pGetDownCoastAdjacentProfile(), and SetDownCoastAdjacentProfile().

◆ m_pUpCoastAdjacentProfile

CGeomProfile* CGeomProfile::m_pUpCoastAdjacentProfile

private

Pointer to the adjacent up-coast profile (may be an invalid profile)

Definition at line 87 of file profile.h.

Referenced by CGeomProfile(), and SetUpCoastAdjacentProfile().

◆ m_VCellInProfile

vector<CGeom2DIPoint> CGeomProfile::m_VCellInProfile

private

In the grid CRS, the integer coordinates of the cells 'under' this profile, point zero is the same as 'cell marked as coastline' in coast object.

Definition at line 93 of file profile.h.

Referenced by AppendCellInProfile(), AppendCellInProfile(), nGetCellGivenDepth(), nGetNumCellsInProfile(), pPtiGetCellInProfile(), pPtiGetEndPoint(), pPtiGetFirstCellInProfile(), pPtiGetLastCellInProfile(), pPtiGetStartPoint(), pPtiVGetCellsInProfile(), and SetCellsInProfile().

The documentation for this class was generated from the following files:

Public Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ CGeomProfile()

◆ ~CGeomProfile()

Member Function Documentation

◆ AppendCellInProfile() [1/2]

◆ AppendCellInProfile() [2/2]

◆ AppendPointInProfile() [1/2]

◆ AppendPointInProfile() [2/2]

◆ bCShoreProblem()

◆ bEndOfCoast()

◆ bHitAnotherProfile()

◆ bHitCoast()

◆ bHitIntervention()

◆ bHitLand()

◆ bInsertIntersection()

◆ bIsGridEdge()

◆ bIsIntervention()

◆ bIsPointInProfile() [1/2]

◆ bIsPointInProfile() [2/2]

◆ bOKIncStartAndEndOfCoast()

◆ bProfileOK()

◆ bProfileOKIncTruncated()

◆ bStartOfCoast()

◆ bTooShort()

◆ bTruncatedDifferentCoast()

◆ bTruncatedSameCoast()

◆ dGetProfileDeepWaterWaveAngle()

◆ dGetProfileDeepWaterWaveHeight()

◆ dGetProfileDeepWaterWavePeriod()

◆ nGetCellGivenDepth()

◆ nGetCoastID()

◆ nGetCoastPoint()

◆ nGetNumCellsInProfile()

◆ nGetProfileID()

◆ nGetProfileSize()

◆ pGetDownCoastAdjacentProfile()

◆ pPtGetPointInProfile()

◆ pPtiGetCellInProfile()

◆ pPtiGetEndPoint()

◆ pPtiGetFirstCellInProfile()

◆ pPtiGetLastCellInProfile()

◆ pPtiGetStartPoint()

◆ pPtiVGetCellsInProfile()

◆ PtVGetThisPointAndAllAfter()

◆ SetCellsInProfile()

◆ SetCShoreProblem()

◆ SetDownCoastAdjacentProfile()

◆ SetEndOfCoast()

◆ SetHitAnotherProfile()

◆ SetHitCoast()

◆ SetHitIntervention()

◆ SetHitLand()

◆ SetPointInProfile()

◆ SetPointsInProfile()

◆ SetProfileDeepWaterWaveAngle()

◆ SetProfileDeepWaterWaveHeight()

◆ SetProfileDeepWaterWavePeriod()

◆ SetStartOfCoast()

◆ SetTooShort()

◆ SetTruncatedDifferentCoast()

◆ SetTruncatedSameCoast()

◆ SetUpCoastAdjacentProfile()

◆ TruncateProfile()

Field Documentation

◆ m_bCShoreProblem

◆ m_bEndOfCoast

◆ m_bHitAnotherProfile

◆ m_bHitCoast

◆ m_bHitIntervention

◆ m_bHitLand

◆ m_bIntervention

◆ m_bStartOfCoast

◆ m_bTooShort

◆ m_bTruncatedDifferentCoast

◆ m_bTruncatedSameCoast

◆ m_dDeepWaterWaveAngle